Canadian Rigging Design Guide
The guidelines provided in this document are general suggestions on the potential lifting capacity of the Yoke rigging system used with a combination of CCMC approved ASSY self tapping screws. To accommodate different rigging scenarios, such as CLT flat floor panel, CLT wall panel tilting and Glulam beam, a variety of screw options with either full thread or partial thread is provided, allowing rigging for the thinnest panels (78 mm) up to the bulkiest ones.
All Yoke devices provided by MyTiCon Timber Connectors have been tested in a North American testing facility to provide confidence to designers and safety on site. The variety of options are compatible with most engineered wood products available in North America; Cross Laminated Timber, Nail Laminated Timber, Glulam, Mass Plywood Panel, Structural Composite Lumber, etc.
Name it, we can lift it.